46340 Continental Drive, Chesterfield, MI 48047

CAREERS

Prototech Laser staffing needs for 2022-2023:

Please send all resumes to Lori Williams, office@ptlaser.com

1st Shift QC Inspector:

* Must have min of 1 year recent experience in quality assurance
* Must be comfortable working in a every changing environment
* Must have CMM quality inspection experience, PC DMIS a plus
* Must have ability to make judgment calls
* Must have ability to lift 30 lbs. without assistance
* Must have ability to read & understand prints; GD&T ability a plus
* Must have ability to use and understand standard measurement equipment (i.e.: height gage, calipers
and micrometers)
* Candidates will be required to perform an inspection part test, which will be done here on site.
* Shift Mon thru Fri: 6:00am to 4:30pm (10 hour shift) or 6:00am to 2:30pm (8-hour shift), Sat 6:00am to
12:00pm (when needed)
* Salary $16.00 to $20.00 per hour

1 st Shift Machinist – CNC Mill Operator/Programmer:

* MUST have min of 10 years’ experience machining Weldment and Prototype Parts
** MUST have experience operating/programming on Haas Equipment
** MUST have Mastercam programming experience
* Experience needs to be recent, as well as dedicated, meaning candidates main responsibility
* MUST be able to lift 30lbs without assistance
* MUST be comfortable working in a every changing environment
* MUST have ability to read blueprints
* MUST have ability to use and understand standard measurement equipment
* 1 st Shift Mon thru Fri: 6:00am to 4:30pm (10 hour shift) or 6:00am to 2:30pm (8 hour shift), Sat 6:00am
to 12:00pm (when needed)
* Salary up to $33.00 per hour based on experience
* MUST have excellent punctuality and attendance

1st Shift Machinist – CNC Lathe Operator/Programmer:

* Min of 5 years’ experience on Haas Equipment
* MUST be able to CREATE and maintain CNC programs via a Haas Controller
* Experience needs to be recent, as well as dedicated, meaning candidates main responsibility
* MUST be able to lift 30lbs without assistance
* MUST be comfortable working in a every changing environment
* MUST have ability to set-up as well as re-set up jobs
* MUST have ability to read blueprints
* MUST have ability to use and understand standard measurement equipment
* Shift Mon thru Fri: 6:00am to 4:30pm (10 hour shift) or 6:00am to 2:30pm (8 hour shift), Sat 6:00am to
12:00pm (when needed)
* Salary up to $33.00 per hour, depending on experience
* MUST have excellent punctuality and attendance

1 st Shift 5 Axis Laser Operator/Programmer:

* Min of 5 years’ experience on 5-Axis Laser Equipment
* Experience needs to recent as well as candidates main responsibility
** Ability to program at the machine
* Ability to maintain CNC programs
* Ability to lift 30lbs without assistance
* Ability to follow written and verbal directions
* Must be available to work overtime and weekends when needed
* 1 st Shift Mon thru Fri: 6:00am to 4:30pm (10 hour shift) or 6:00am to 2:30pm (8 hour shift), Sat 6:00am
to 12:00pm (when needed)
* Salary $23.00 to $28.00 based on experience

2nd Shift 3 Axis Laser Operator/Programmer:

* Min of 5 years’ experience on Trumpf 3-Axis Laser Equipment
* Experience needs to recent as well as candidates main responsibility
* Ability to set cutting conditions and make basic program edits
* Ability to maintain CNC programs
* Ability to lift 30lbs without assistance
* Ability to follow written and verbal directions
* Must be available to work overtime and weekends when needed
* 2nd Shift Mon thru Fri: 4:30 pm to 3:00 am (10 hour shift) or 4:30 pm to 1:00 am (8 hour shift), Sat
2:00 pm to 8:00pm (as needed)
* Salary $19.00 to $28.00 based on experience

1 st /2 nd Shift MIG production style welder:
* Min of 3 years’ experience, MUST be recent
* Must be able to MIG weld Mild Steel and Armor
* Certificate courses in any reputed institute in MIG/TIG welding are favored
* Must have knowledge in welding symbols and process
* May have to use forklift to move objects
* Must cooperate with supervisors and other employers and maintain documentation
* Must be able to lift 40lbs without assistance
* 1 st Shift Mon thru Fri: 6:00am to 4:30pm (10 hour shift) or 6:00am to 2:30pm (8 hour shift), Sat 6:00am to
12:00pm (when needed)
* 2nd Shift Mon thru Fri: 4:30 pm to 3:00 am (10 hour shift) or 4:30 pm to 1:00 am (8 hour shift), Sat 2:00 pm to 8:00pm
(as needed)
* Candidates will be required to submit a weld test which will be done here on site.
* Salary: 1st Shift Rate: $18.00 per hour / 2nd Shift Rate: $18.90 per hour, includes a 5% shift premium
* Must have excellent punctuality and attendance

2 nd Shift Robotic Weld Cell Operator:
* Min of 3 years welding experience
* Must have knowledge of Fanuc Robotic Weld Cell
* Must be able to clear alarms & diagnose issues with weld cell
* Must be able to work standing up
* Must have ability to lift 30 lbs without assistance
* Ability to follow written and verbal directions
* Must be available to work overtime and weekends when needed
* 2nd Shift Mon thru Fri: 4:30 pm to 3:00 am (10 hour shift) or 4:30 pm to 1:00 am (8 hour shift), Sat 2:00 pm to 8:00pm
(as needed)
* Salary $17.00 to $20.00 based on experience, Shift premium 5%

3 Axis Trumpf Laser Operator/Programmer, 1 st shift:
* Min of 5 years’ experience on Trumpf 3-Axis Laser Equipment
* Experience needs to recent as well as candidates main responsibility
* Ability to set cutting conditions and make basic program edits
* Ability to maintain CNC programs
* Ability to lift 30lbs without assistance
* Ability to follow written and verbal directions
* Must be available to work overtime and weekends when needed
* 1st Shift Mon thru Fri: 6:00am to 4:30pm (10 hour shift) or 6:00am to 2:30pm (8 hour shift), Sat 6:00am to 12:00pm
(when needed)
Job Type: Full-time
Salary: $23.00 – $28.00 per hour

1st Shift Welder TIG Fitter/MIG:

* Must have strong “fitter” skills from blueprints **IMPORTANT**
* Must be able to read blueprints
* Must have strong TIG skills and be good with thin aluminum and steels.
* Min of 3 years’ experience, MUST be recent
* Must be able to MIG/TIG weld Mild Steel, Aluminum & Stainless Steel Material
* Certificate courses in any reputed institute in MIG/TIG welding are favored
* Must have knowledge in welding symbols and process
* May have to use forklift to move objects
* Must cooperate with supervisors and other employees and maintain documentation
* Must be able to lift 40lbs without assistance
* Candidates will be required to submit a weld test which will be done here on site.
* Salary $20.00 to $26.00 per hour, based on experience

 

1st Shift Machinist – CNC Mill Operator/Programmer:

* MUST have experience machining Weldment and Prototype Parts
* MUST have experience operating/programming on Haas Equipment
* MUST have Mastercam programming experience
* Experience needs to be recent, as well as dedicated, meaning candidates main responsibility
* MUST be able to lift 30lbs without assistance
* MUST be comfortable working in a every changing environment
* MUST have ability to read blueprints
* MUST have ability to use and understand standard measurement equipment
 

2nd Shift 5 Axis Laser Operator/Programmer:

* Min 1-2 years’ experience necessary, NTC experience a plus
* Ability to program at the machine
* Ability to maintain CNC programs
* Ability to lift 30lbs without assistance
* Ability to follow written and verbal directions

 

1st Shift 3 Axis Laser Operator:

* Min of 1-2 years’ experience on 3-Axis Laser Equipment, Trumpf experience a plus

* Ability to lift 30lbs without assistance

* Ability to follow written and verbal directions

 

1st Shift Cost Estimator:

Responsibilities Include But Not Limited To: 

  • Reviewing customer requirements and project specifications
  • Creatively present professional and technical responses to customer RFQ’S
  • Analyze projects to develop a strategy to successfully provide competitive bids and win business
  • On a timely basis prepare estimates / quote letters that consider the scope of all opportunities and proposals
  • Effectively communicate the solution and estimated cost with our sales team
  • Prepare Cost Breakdown forms for all OEM’s and Tier One’s
  • Ability to prepare custom responses to RFQ’s as required by customer
  • Identify, research, and aquire costs for purchase goods as required by RFQ

 

Qualifications: 

  • Min. 3 years’ experience – Parts Manufacturing Costing/Manufacturing Plant experience
  • Manufacturing Engineering background a plus for technical applications that will apply to Job.
  • Knowledge of parts fabrication both in high and low volume
  • Technical and the ability to read and interpret drawings and specifications
  • Accounting skills or effective analytical skills a plus
  • Strong written communication skills, exceptional organizational & time management skills a definite plus
  • Must be able to work on multiple projects at one time
  • Planning and problem-solving capabilities
  • Ideal candidate must be proactive and motivated, able to work independently with direction given, and have proficient computer skills, particularly in all Microsoft Office Products
  • Experience quoting fabricated metal assemblies
  • Experience quoting machined components